Adjustable Hose End Feeder

£17.99

RocketGro have sourced the very best hose end feeder available. It is so important to feed your garden throughout the growing season. Combine this feeder with our range of liquid feeds and you will see better results all season. Ideal for all plants and fruit and vegetables outside – whether in pots and containers, hanging baskets, beds, borders or your lawn. A really well made and robust piece of equipment. H-20cm. W-12cm. L-20.5cm.

Key Positives:

  • Easy to use.
  • With 3 adjustable settings and a simple clip lock attachment to any hose.
  • Fan Spray Pattern. Stream Spray Pattern. Cone Spray Pattern. Giving you the perfect coverage.
  • One fill lasts a minimum of 20 minutes avoiding multiple watering can top ups.
  • Ensures an accurate dosage for all your garden.
  • Perfect for all Beds & Borders watering.
  • Ideal for Lawn feeding and keeping your Lawn lush and healthy.
  • Great for Veg Beds and Allotments.
  • Great for applying Nematodes.
  • RocketGro Liquid Feeds add Fertiliser & Microbes to your soil.
  • Always use RocketGro Organic Liquid Feeds to feed your garden naturally.
£17.99

HOW TO USE
WITH LIQUID FEEDS

As with all liquid feeds, watering early morning or at the end of day is highly recommended and avoids excessive evaporation loss of water.

Step 1: Shake the bottle of RocketGro Plant Food before pouring. Fill the container of the sprayer as required or to the maximum 1000ml line.

Step 2: Screw the sprayer back onto the container, attach the hose using a snap on connector.

Step 3: Set the dosage to 2oz by turning the horizontal green dial sat on the top of the container unit. This setting uses 10ml of liquid feed for every 0.75L of water.

Step 4: Turn on the water for your hose. Adjust front dial of sprayer to one of the 3 optional spray patterns.

Step 5: Squeeze the trigger and direct the jet of water whilst holding the sprayer in an upright position. 500 ml of feed will last up to 10 minutes at full flow.

Step 4: Clean the sprayer after use. Unscrew the container, decant any leftover Plant Food back into the bottle, wash out the container. Reattach the sprayer and spray through water until it runs clear just to keep the mechanism from potentially clogging up in the medium term.

Step 5: If feeding is not required, and you wish to use the sprayer for general watering, set the dosage to 0 and then spray.

  1. Mark out area to be treated.
  2. Wash the feeder through with water to ensure it is clean.
  3. Add entire contents of the pack to feeder bowl ( or unless otherwise instructed by Nematode producer).
  4. Fill the bowl with water before attaching the hose.
  5. Set the spray pattern to ‘flat‘.
  6. Set dial to 4 oz (preventative/light application) or 8 oz (moderate/heavy application)
  7. Taking care to keep the feeder in an upright position apply evenly to the whole of the area for 8 minutes using a side-to-side motion to keep the nematodes well mixed. During this time most of the nematodes will have been applied.
  8. Watering-in phase: After distributing the initial mixture, treat the exact same area again with water only to wash the nematodes deep into the soil or grass thatch.
  9. Make sure the area where these have been applied does not dry out after applying nematodes and keep it well watered for at least two weeks. This is important.

HOW TO USE FOR NEMATODE APPLICATION